Bosch Solution 2000 User Manual page 8

8 en | Codepad Introduction
Codepad indicator
icons
STAY
MAINS
FAULTS
Programming Mode
Tab. 3.2: Icon Indicators
2017.09 | 04 | F.01U.298.028
Status
On
Off
Flashing twice a sec
Flashing twice a sec with
AWAY indicator
Flashing once every 3 sec
On
On
Flashing
On
Off
Flashing
Flashing
User's Guide
Definition
System is armed in STAY Mode 1 or
STAY Mode 2.
System is not armed in STAY Mode 1 or
STAY Mode 2.
Zone isolating mode
Setting STAY Mode 2 zones.
Day alarm status – day alarm turned on.
System is disarmed.
AC MAINS power normal.
AC MAINS supply has failed.
There is a system fault that needs to be
rectified.
The system is normal, there are no
faults.
There is a system fault that needs to be
acknowledged.
These two indicators flash when you
enter Installer's Programming Mode or
use any Master Code function.
The OFF indicator lights when the
system is disarmed and flashes when a
zone becomes unsealed when
disarmed. The indicator stops flashing
when all zones are sealed.
The ON indicator lights when the
system is armed and flashes when an
alarm occurs. The indicator is reset
after a valid User Code is entered.
Bosch Security Systems, Inc.
Control Panel