Advertisement
Connecting to a camera and a computer
Connect this product to a camera and a computer to operate the camera
from the computer.
You can operate multiple cameras at once from a single computer by
connecting them as illustrated below.
Set the MASTER/CLIENT switch on one of the products (camera control
boxes) to "MASTER." Then, set the MASTER/CLIENT switches on the others
to "CLIENT."
Conceptual diagram
DSC-RX0
Camera control box
Note
• You can connect one camera to this product. To use multiple cameras, you
must connect each camera to a separate camera control box.
• It is recommended that you use 1000BASE-T switching hubs and LAN cables
rated as category 5e or higher.
GB
6
Switching hub
Computer
Advertisement
