What This Chapter Contains - ABB ACS355 series User Manual

Installation checklist

What this chapter contains

This chapter contains a list for checking the mechanical and electrical installation of
the drive.
Checking the installation
Check the mechanical and electrical installation of the drive before start-up. Go
through the checklist below together with another person. Read chapter
page 17 of this manual before you work on the drive.
Check
MECHANICAL INSTALLATION
The ambient operating conditions are within allowed limits. (See
Checking the installation site
and noise on page
The drive is fixed properly on an even vertical non-flammable wall. (See
installation on page 33.)
The cooling air will flow freely. (See
on page 34.)
The motor and the driven equipment are ready for start. (See
installation: Checking the compatibility of the motor and drive
Technical data:
ELECTRICAL INSTALLATION (See
Electrical installation
For ungrounded and corner-grounded systems: The internal EMC filter is disconnected
(EMC screw removed).
The capacitors are reformed if the drive has been stored over a year.
on page
382 and Ambient conditions
Mechanical
Motor connection data
Planning the electrical installation
on page 49.)
33 as well as Technical
on page 389.)
installation:
on page 385.)
Installation checklist 59
7
Safety
Mechanical installation:
data: Losses, cooling data
Mechanical
Free space around the drive
Planning the electrical
on page 40 as well as
on page 39 and
on