Table of Contents
Advertisement
Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
5.3.2 Using 120Ω DDF Unit
To use the 120Ω DDF unit, proceed as follows:
1)
Lead the cables into their corresponding cable-fixing troughs.
2)
Fix them onto the units.
3)
Remove the nameplate of the module and note the difference among the ends of
a, b, and s. "s" stands for the grounding cable.
4)
Fix the nameplate back to the position.
5)
Fill the identifier list according to actual conditions.
Note:
The identifier list of the 120Ω DDF unit is attached on the cover of the enclosure and
fill it as needed.
5.3.3 Using the Grounding Busbar
The installation procedure is the same as that of the 75Ω DDF. For details, see
section 5.2.3 "Using the Grounding Busbar".
Chapter 5 Installing Digital Distribution Frame
Huawei Technologies Proprietary
5-4
Advertisement
Table of Contents
