SC-F9300 Series
User's Guide
C
Flip the Auto switch to Off and hold down the
Manual switch on the
the media for a single wrap around the core.
D
Flip the Auto switch to
Basic Operations
E
side to take-up
.
40
Confirm that the media is attached without
looseness.
If the tension on the left and right of the media
is different in the areas shown in the
illustration below, the media will not be taken
up correctly. When one side is loose, restart the
procedure from Step 1.
Note:
You can confirm differences in tension by lightly
tapping both edges of the media as shown in the
illustration below.