Configuring Password Authentication For Console Login - HP 10500 Series Configuration Manual

Step
3. Disable
authentication.
4. Assign a user
role.
The next time you attempt to log in through the console port, you do not need to provide any username
or password.

Configuring password authentication for console login

Step
1. Enter system view.
Enter AUX line view or
2.
class view.
3. Enable password
authentication.
4. Set a password.
5. Assign a user role.
The next time you attempt to log in through the console port, you must provide the configured login
password.
Command
authentication-mode none
user-role role-name
Command
system-view
•
To enter AUX line view:
line aux first-number
[ last-number ]
•
To enter AUX line class view:
line class aux
authentication-mode password
set authentication password { hash |
simple } password
user-role role-name
23
Remarks
By default, authentication is disabled for the
AUX line.
By default, an AUX line user of the default
MDC is assigned the user role
network-admin, and Non-default MDCs do
not support console or AUX login.
Remarks
N/A
Use either command.
A setting in user line view is applied
only to the user line. A setting in user
line class view is applied to all user
lines of the class.
A non-default setting in either view
takes precedence over a default
setting in the other view. A
non-default setting in user line view
takes precedence over a non-default
setting in user line class view.
A setting in user line view takes effect
immediately and affects the online
user. A setting in user line class view
does not affect online users and takes
effect only for users who log in after
the configuration is completed.
By default, authentication is disabled
for the AUX line.
By default, no password is set.
By default, an AUX line user of the
default MDC is assigned the user role
network-admin, and Non-default
MDCs do not support console or AUX
login.