ABB SM2000 User Manual page 91

Advanced Videographic Recorder
SM2000
IM/SM2000 Issue 11
Select an alarm Enable source. When the 'Enable source' is
active, the alarm is enabled. When the source is inactive the
alarm is disabled. If set to 'None' the alarm is always enabled.
Note. For Delayed Process alarm operation, see Fig. 4.15,
page 86.
Set to 'On' to record all changes in the alarm state in the Alarm
event log – see Section 2.7, page 23.
Assign the alarm to one or more of 12 groups.
The alarm states assigned to each group are 'ORed' together to
create an internal digital signal that may be assigned to relays,
digital outputs or internal digital controls.
4 CONFIGURATION
89