ABB SM2000 User Manual page 68

Advanced Videographic Recorder
SM2000
•1 If this parameter is changed, internally recorded data files are recreated and unarchived data is lost.
66
Set the Secondary sample rate to between 0.1 seconds and
B
720 minutes (12 hours).
•1
Select a signal source to enable switching between the primary
B
and secondary sample rates. Refer to Appendix A, page 108 for
•1
a description of the available sources.
Note. This signal is edge-triggered. A rising edge (inactive to
active) switches to the secondary sampling rate. A falling edge
(active to inactive) switches to the primary sampling rate.
Secondary
4 CONFIGURATION
Primary
IM/SM2000 Issue 11