40
7.
Seal the connection on the router, starting at least 2 inches from the
connector, apply the tape, moving along the cable towards the
connector so that it covers the bottom of the antenna and the top of
the connector without gaps and with a layer of overlapping. This is an
area where water can enter the connector and cable.
Covering the Router connection with weatherproof tape
Care should be taken when weatherproofing RF connectors. Do
NOTE:
not stress or bend the cable during the weatherproofing process.
8.
Attach the mast (where applicable) to the property securely and as
appropriate to the requirements of the site. Ensure that direction of the
antenna and its' polarization are correct aligned.
Nokia RoofTop™ Wireless Router Installation Guide