Table of Contents
Advertisement
CHAPTER 5
5.1 Introduction
Nokia RoofTop™ Wireless Router Installation Guide
Outdoor installation
5.1.1 Components to be installed
The Outdoor portion of the Nokia RoofTop Wireless Router system
comprises:
•
Wireless router with integral antenna
•
Grounding kit for router (if required)
•
Router mounting hardware
•
Antenna (if non-integral) and mounting hardware
•
A shielded multiwire cable containing 7 twisted pairs of wires.
This is used to connect the wireless router with the NPU. Nokia
provides several different lengths of cable with D-Connectors
already installed to the end of the cable. The multiwire cable must
be Cat-5 cable, size AWG 22 or 24.
•
Flexible RF cable in the case of non-integral antenna (see below)
•
RF Cable adaptor, Nokia Code WR 46899A (see below)
29
Advertisement
Chapters
Table of Contents
