Receiver Specifications; Table 111: Receiver Specifications - Tetra - Motorola DIMETRA MTS 4 Installation, Configuration, And Service Manual

Applicant: Motorola Solutions
364 | Technical Specifications
Transmitter Specification
Tx Conducted Emission (50kHz TEDS)
Intermodulation Attenuation
RF Input Impedance

Receiver Specifications

The receiver specifications are listed in
Receiver Specifications – TEDS on page
All specifications listed in the following two tables are through the RF Distribution System, unless otherwise stated.
Table 111: Receiver Specifications – TETRA
Receiver Specification
Sensitivity (normal conditions, unprotected T1, static, 4% BER):
population mean:
spec limit:
Sensitivity (normal conditions, faded, TU50, 4% BER):
population mean :
spec limit:
Degradation (extreme conditions, static and faded)
Nominal Error Rate (unprotected T1):
Static, -85 to -40 dBm:
Static -40 to -20 dBm:
TU50, -84 to -40 dBm:
Maximum On-channel Desired Power Level
Co-channel Interference (19 dB C/I, faded, unprotected T1): TU50
Adjacent Channel Interference (faded, unprotected T1, normal conditions, 45 dB
C/I (40 dB C/I for 800 MHz), at -103 dBm): TU50
Adjacent Channel Interference (faded, unprotected T1, extreme conditions, 35
dB C/I (30 dB C/I for 800 MHz)), at -97 dBm): TU50
Blocking (static, normal conditions, 4% BER):
Send Feedback | September 2014 | 6802800U74-AD
Value or Range
2500 - frb kHz
>frb
112.5 - 262.5 kHz
262.5 - 500 kHz
500 - frb kHz
>frb
70 dB
50 (nom.)
Table 111: Receiver Specifications – TETRA on page 364
365.
Equipment Type: ABZ89FC5827 / 109AB-5827
-90 dBc
-95 dBc
-70 dBc
-75 dBc
-80 dBc
-95 dBc
and Table 112:
Value or Range
-120.0 dBm(-119.5
dBm 800 MHz)
-117.5 dBm
-113.5 dBm(-113.5
dBm 800 MHz)
-111.0 dBm
3 dB
0.01%
0.1%
0.4%
-20 dBm
2.0%
2.0%
2.0%
Table continued...
Exhibit D2