Destination Ip; Destination Ipv6 - HP MSR1003-8S Command Reference Manual

destination ip

Use destination ip to configure the destination IP address for the operation.
Use undo destination ip to remove the destination IP address.
Syntax
destination ip ip-address
undo destination ip
Default
No destination IP address is configured for the operation.
Views
DHCP/DLSw/DNS/SNMP/TCP/voice operation view
ICMP/UDP echo operation view
Path/UDP jitter operation view
UDP tracert operation view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the destination IP address for the operation.
Examples
# Specify 10.1.1.1 as the destination IP address for the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] destination ip 10.1.1.1

destination ipv6

Use destination ipv6 to configure the destination IPv6 address for the operation.
Use undo destination ipv6 to remove the destination IPv6 address.
Syntax
destination ipv6 ipv6-address
undo destination ipv6
Default
No destination IPv6 address is configured for the operation.
Views
ICMP echo operation view
Predefined user roles
network-admin
17