Snmp-Agent Trap Queue-Size - HP MSR1003-8S Command Reference Manual

Predefined user roles
network-admin
Usage guidelines
Use SNMP notification logging to record SNMP notifications sent by the SNMP agent for notification
tracking. The SNMP agent sends logs to the information center. You can configure the information center
to output the logs to a destination as needed.
Examples
# Enable SNMP notification logging.
<Sysname> system-view
[Sysname] snmp-agent trap log

snmp-agent trap queue-size

Use snmp-agent trap queue-size to set the SNMP notification queue size.
Use undo snmp-agent trap queue-size to restore the default queue size.
Syntax
snmp-agent trap queue-size size
undo snmp-agent trap queue-size
Default
The SNMP notification queue can store up to 100 notifications.
Views
System view
Predefined user roles
network-admin
Parameters
size: Sets the maximum number of notifications that the SNMP notification queue can hold. The value
range is 1 to 1000.
Usage guidelines
When congestion occurs, the SNMP agent buffers notifications in a queue. SNMP notification queue size
sets the maximum number of notifications that this queue can hold. When the queue size is reached, the
oldest notifications are dropped for new notifications.
Examples
# Set the SNMP notification queue size to 200.
<Sysname> system-view
[Sysname] snmp-agent trap queue-size 200
Related commands
snmp-agent target-host
•
snmp-agent trap enable
•
• snmp-agent trap life
197