Work Mode; Extra Function - Husqvarna DXR250 Operator's Manual

Work mode

Rotate tower
counterclockwise
Rotate tower clockwise
Arm 1 in
Arm 1 out
Arm 2 down
Arm 2 up
Arm 2 telescope out
(DXR310)
Arm 2 telescope in
(DXR310)
Arm 1 and arm 2 out
Arm 1 and arm 2 in
Arm 3 up
Arm 3 down
28 – English
OPERATION
Angle tool inwards*
Angle tool outwards*
Adjustable pressure/flow
to hydraulic tool
(breaker/cutter)
Full pressure/flow to
hydraulic tool (breaker/
cutter)
Cutters open/close**
Adjustable flow to drum
cutter
Limited flow, backwards
rotation, to drum cutter
* The function works even if the right button on the right
joystick is depressed. This can be useful if you
simultaneously want to run arm 1 and 2 in parallel.
** The button that opens/closes the cutters varies
depending on which type of cutters are being used.
If joystick setup is set to Auto
and Extra function is not
activated on the machine.

Extra function

For activation, see instructions in the 'Settings' section
under the heading 'Extra features'.
Extra 1, direction 1
Extra 1, direction 2
Extra 2, direction 1
Extra 2, direction 2
If joystick setup is set to
Auto or Extra 1/Extra 2.