Troubleshooting Dhcp Relay Agent Configuration - HP 10500 Series Configuration Manual

[SwitchA-Vlan-interface1] dhcp relay information remote-id string device001

Troubleshooting DHCP relay agent configuration

Symptom
DHCP clients cannot obtain any configuration parameters through the DHCP relay agent.
Analysis
Some problems may occur with the DHCP relay agent or server configuration.
Solution
To locate the problem, enable debugging and execute the display command on the DHCP relay agent
to view the debugging information and interface state information.
Verify that:
• DHCP is enabled on the DHCP server and relay agent.
The DHCP server has an address pool on the same subnet as the DHCP clients.
•
The DHCP server and DHCP relay agent can reach each other.
•
• The relay agent interface connected to DHCP clients is correlated with a correct DHCP server group
and the IP addresses of the group members are correct.
67