Configuring The Rcp(S); Displaying The Rcp Configuration Screen - Canon BU 45 User Manual

Canon BU 45 Camera Control System User's Manual

Configuring the RCP(s)

After installing and connecting the RCP(s) and camera(s), (see pages 15 through 23 for
details), each RCP must be configured using the RCP Configuration screen.

Displaying the RCP Configuration Screen

1.
Place the RCP main power switch in the ON position, then press the power
button at the bottom of the touch screen. The system initializes, and the RCP
Loading screen is momentarily displayed on the touch screen (Figure 14).
Figure 14
2.
Select the progress bar on the RCP Loading screen (Figure 15).
Figure 15 Selecting the Progress Bar on the
24
The main power switch is located at the rear of the RCP (see
Figure 11 on page 21).
RCP Loading
Screen
RCP Loading
Screen