D-Link AC1200 User Manual page 35

Section 3 - Configuration
If you choose WEP, the following options will appear:
Select whether to use 64-bit or 128-bit encryption.
WEP Key Length:
Select whether to use Open or Shared authentication.
Authentication:
WEP Key 1: Set the WEP key/password for your wireless network. Based on
whether you are using 64 or 128-bit encryption, and whether
you are using a HEX or ASCII key, you will need to enter different
numbers of characters for your key, as indicated below the WEP
Key text box. ASCII keys may use letters and numbers only, and
HEX keys may use numbers 0-9 and letters A-F only.
Note: WEP encryption is considered an outdated and insecure standard. It is
provided here for compatibility only and is not recommended. WEP encryption is
not compatible with 802.11ac and will severely limit network throughout
If you choose WPA-Personal, the following options will appear:
WPA Mode: Select whether to use WPA2 only or Auto (WPA or WPA2). WPA2
only is the most secure, provided that all of your clients can
support it.
Cipher Type: Select whether to use the TKIP or AES cipher. The AES cipher is
the most secure, provided that all of your clients can support it.
Pre-Shared Key: Enter the key/password you want to use for your wireless network.
The key must be between 8 and 63 characters long, and may only
contain letters and numbers.
D-Link DWR-118 User Manual 31