D-Link AC1200 User Manual page 23

Section 3 - Configuration
Maximum Idle
Set the maximum time your connection can be idle before
Time: disconnecting. Set it to 0 or choose Auto in Reconnect Mode to
disable this feature.
Primary DNS
Fill in if provided by your ISP. If not, keep the default value
Server:
(optional).
Secondary DNS
Fill in if provided by your ISP. If not, keep the default value
Server:
(optional).
Roaming:
Enabling this option will allow you to connect when roaming.
Note: Roaming connections may incur additional fees from your
service provider.
Bridge Ethernet
Activate this feature to use the Ethernet WAN port as an additional
Ports:
LAN port.
NAT disable:
Enabling this option will disable the NAT function of the DWR-118,
allowing it to act as a link for your devices to your Internet
connection, but without routing functions.
Transparent
Enabling the Transparent Bridge function disables the routing/
Bridge:
NAT functions and passes the public WAN IP address given by your
service provider directly through to the local client or PC. This can
only be used if a single IP address has been assigned by your ISP. If
transparent bridge is enabled, the above NAT Disable option will
not be available.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-118 User Manual 19