D-Link AC1200 User Manual page 25

Section 3 - Configuration
The subsequent configuration pages will differ depending on the selection you
make on this page.
DHCP Connection
Choose this if your Internet connection automatically provides
(Dynamic IP you with an IP address. Most cable modems use this type of
connection. See Dynamic IP (DHCP) on page 9 for information
Address):
about how to configure this type of connection.
Username Choose this option if your Internet connection requires a
/ Password username and password to connect. Most DSL modems use
Connection this style of connection. See PPPoE (Username / Password) on
(PPPoE):
page 12 for information about how to configure this type of
connection.
Username
Choose this option if your Internet connection requires Point-
/ Password to-Point Tunneling Protocol (PPTP). See PPTP on page 14 for
Connection (PPTP): information about how to configure this type of connection.
Username Choose this option if your Internet connection requires Layer 2
/ Password Tunneling Protocol (L2TP). See L2TP on page 16 for information
Connection (L2TP): about how to configure this type of connection.
4G LTE / 3G
Choose this connection if you have installed a SIM card into the
Connection: DWR-118. See 4G LTE / 3G on page 18 for information about
how to configure this type of connection.
Static IP Address Choose this option if your Internet Service Provider (ISP)
Connection:
provided you with IP address information that has to be manually
configured. See Static IP on page 11 for information about how
to configure this type of connection.
After entering the requested information,click Next to continue.
Note: If you are not sure what connection type to use or what settings
to enter, check with your Internet Service Provider (ISP).
D-Link DWR-118 User Manual 21