Channel Patch - Philips 64331 Operation Manual

Operations Manual
In DMX Patch, you have three options:
• Channel Patch. This allows you to allocate the DMX addresses you wish to control to any of the 96 channel faders
available (48 on the 12/24 version).
• DMX Patch. This function is similar to the above but allows you to work in the opposite way by assigning a spe-
cific DMX address to a channel fader.
• Default Patch. This will return the console to its default settings.

Channel Patch

Select this function with SOFTKEY A "Chan Patch" . The LCD display will appear as shown in Figure 61.
• Use SOFTKEY A "UP" or SOFTKEY B "Down" to change the channel number with which you are working.
• Use SOFTKEY C ">" to move to the dimmer field.
Channel Patch (Dimmers)
If you move to the dimmer field the LCD display will appear as shown in Figure 62.
• Use SOFTKEY B "Chan" to return to the Channel select field.
• Use SOFTKEY C ">" or SOFTKEY D "<" to add more dimmers to the channels.
• Use SOFTKEY A "Up" to change the dimmer number.
• Use SOFTKEY B "Down" to lower the dimmer number.
• Use SOFTKEY C ">" to add another dimmer.
• Use SOFTKEY D "Enter" to store the settings.
• You can use the FLASH LEVEL fader to rapidly change the value.
• If you wish to remove a dimmer from the patch set it to "00", it will then be removed.
5 6
SET UP FUNCTIONS
address Patch
Menu
Patch By Cha>01
Release
Dimmer:
001
DMX Base
FX
Master: xxx
Figure 61: Channel Patch - LCD Display
address Patch
Menu
Patch By Cha 01
Release
Dimmer:
>001
DMX Base
FX
Master: xxx
Figure 62: Channel Patch (Dimmers) - LCD Display
A
UP
B
Down
C
>
D
Enter
A
UP
B
Chan
C
>
D
<