List Ml; Auto Dmx; P/T Invert; Memory Lock - Philips 64331 Operation Manual

Deleting Fixtures
To delete fixtures press SOFTKEY A "Delete Fix" . To delete all the fixtures select SOFTKEY B . You will be
prompted to confirm this decision by pressing SOFTKEY A for "Yes" or SOFTKEY C for "No" .
To select a single fixture select SOFTKEY A . Select the fixture by pressing the Flash button for that fixture. Confirm
the deletion select SOFTKEY A "Yes" . To exit without completing the Delete, select SOFTKEY C "No" .
Note: Deleting a Fixture will remove it from all the Scenes and Chases in which it is recorded.
Deleting Chases
To delete Chases select SOFTKEY B "Delete Chase" from the Delete Menu home screen.
You can delete a single chase by selecting SOFTKEY A "Delete One" . Select the chase you wish to delete by
selecting the Flash button for that Chase. Confirm the deletion by selecting "Yes" or leave without deleting the chase
by selecting "No" .
To delete all the currently recorded chases select the "Delete All" function. Confirm you wish to delete all the chases
by selecting "Yes" or exit by selecting "No".

List ML

This function is available if the MENU key is pressed while in ML mode. It is on the second page of the ML menu
pages. The List ML function will show which Fixtures are patched to the console and which DMX address they have.
This information is permanently available in lower left window of the monitor.

Auto DMX

This function will automatically patch all the fixtures assigned starting with the first channel available for Moving
lights. The function is available on the second page of the ML menu screens.

P/T Invert

This allows you to invert either or both of the pan and tilt functions. If you have mistakenly hung a moving light in
the wrong orientation - in relation to the others of the same type - reversing the pan and tilt will mean it works in the
same way as the other fittings when adjusting pan and tilt.
To use P/T Invert function:
1) Select the Moving Light(s) you wish to adjust.
2) Press MENU then go to the third page of the menu by using SOFTKEY D "Next" .
3) Select SOFTKEY B "P/T Invert" .
4) You can now toggle Pan and Tilt between Normal and Inverted by using SOFTKEY A "Pan Normal" and
SOFTKEY C "Tilt Normal" .
5) To store the changes you make use SOFTKEY D "Enter" . To exit without making any changes press the
MENU key.

Memory Lock

This allows the user to lock the console using a password to stop any changes being made to the console. The
password is entered using the FX Keys .
on the third page of the menu screens.
To access memory lock:
1) Press MENU.
2) Press SOFTKEY D "Next" three times.
3) Press SOFTKEY C "Lock Memory".
4) You will be prompted to input your password
Use SOFTKEY D "Enter" to input your password.
5) The console will now be locked and further programming is prohibited until unlocked. You are still able to
play back any Scenes, FX or Submasters recorded.
(See "Change Password" on page 67
(See "Change Password" on page 67
200 Plus Series Console
for more information). This function is
for more information).
Moving Light (ML) Mode
35