Set Up Functions; Dmx Settings; Channel Set Up; Dmx Patch - Philips 64331 Operation Manual

SET UP FUNCTIONS

All the set up functions are accessed by pressing the MENU key when in Single Scene, Two Scene or Submaster
modes.

1. DMX Settings

When you press Menu the LCD display will appear as shown in Figure 59.

Channel Set Up

To enter this function, press SOFTKEY A "Chan Set Up" . There are 512 channels available for use with the Strand
Lighting 200 Plus Series Consoles. You need to allocate channels to each type of device that can be used with the
console, Channel faders, LEDs and MLs. Figure 60 shows the Channel Set Up screen on the console's LCD display.
• SOFTKEY A "UP" will raise the value
• SOFTKEY B "Down" will lower the value
• SOFTKEY C ">" is used to navigate between fields.
• To rapidly change values hold down the Softkey or use the SOLO fader to change the values extremely quickly.
• To store your changes use SOFTKEY D "Enter" .
Note: If you wish to leave this screen without storing any changes press the MENU button. It will return you to the
previous screen.

DMX Patch

To enter this function, press SOFTKEY B "DMX Patch" .
Menu
Menu
Release
DMX Base
FX
Master: xxx
Figure 59: DMX Settings - LCD Display
Channel Set Up
Menu
Release
Start
Dim:>001 052
LED: 053 153
DMX Base
ML: 154 512
FX
Master: xxx
Figure 60: Channel Set Up - LCD Display
Chan
Set Up
DMX
Patch
LCDSet
Next
UP
End
Down
>
Enter
200 Plus Series Console
A
B
C
D
A
B
C
D
55
DMX Settings