SmartLogger2000-(10-C, 11-C)
User Manual
9.1 Routine Maintenance
9.2 Troubleshooting
Table 9-1 Common faults and troubleshooting methods
No.
Symptom
The
1
SmartLogger
cannot be
powered on.
Issue Draft A (2017-02-15)
Ensure that the SmartLogger is free from strong electromagnetic interference.
Ensure that the SmartLogger is away from heat sources.
Ensure that the heat dissipation holes are not blocked.
Regularly clean the SmartLogger.
Regularly check that cables are secured.
Possible Cause
1. The DC output power cable for the
power adapter does not connect to the
12V IN port of the SmartLogger.
2. The power cable does not connect to
the AC power receiving port of the
power adapter.
3. The AC input power cable does not
connect to the AC socket.
4. The power adapter is faulty.
5. The SmartLogger is faulty.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
Device Maintenance
Suggestion
1. Connect the DC output plug of the
power adapter to the 12V IN port of
the SmartLogger.
2. Check that the power cable connects
to the AC power receiving port of the
power adapter.
3. Check that the power cable connects
to the AC socket.
4. Replace the power adapter.
5. Contact the vendor or Huawei
technical support.
9 Device Maintenance
181