GE Masoneilan SVI FF Quick Starter Manual page 9

Pushbuttons and Local Display
Pushbuttons
The local pushbuttons are located behind a hinged cover, directly below the display window. To
open the cover loosen the screw and swing the cover down. Always re-fasten the cover after use
to protect the pushbuttons from environmental contamination.
The three pushbuttons perform the following functions:
CAUTION
NOTE
© 2017 General Electric Company. All rights reserved
Left Button - Marked with
parameter option currently displayed.
Middle Button - Marked
structure to the previous item in the menu or decrement the value currently
shown in the digital display. When used to decrease a displayed value,
holding the button down causes the value to decrease at a faster rate.
Right Button - Marked
structure to the next item in the menu, or to increment the value currently
shown in the digital display. When used to increase a displayed value,
holding this button down causes the value to increase at a faster rate.
The display is limited to values between 0 and 100. Therefore, the
display may show a value for the actual setpoint that is not valid if
the setpoint is above 100 or below 0.
When an exclamation point (!) appears in the SVI FF display
window, it indicates that there is instrument status available.
*
, permits you to select or accept the value or
–
, permits you to move back through the menu
+
, permits you to move forward through the menu
.
Masoneilan SVI FF Positioner Quick Start Guide =| 9