Safety Camera Alert; System; Time Format; Restore Settings - Motorola XPLORE 500 User Manual

5.8.5.2 Safety Camera Alert

Allows you to activate/deactivate the alert to warn that you are approaching a
speed camera location. Use "+" and "–" to switch between On and Off.
Select
Settings menu.
5.8.6

System

5.8.6.1 Time Format

Allows you to change the time format between 12 hour and 24 hour. Use "+" and
"–" to switch between 12H and 24H.
Select
Settings menu.

5.8.6.2 Restore Settings

Selecting this option will restore all of the settings back to factory default. Once
selected, you will be asked to confirm. Select Yes to confirm and restore the unit
or No to cancel. After selecting Yes, you will then be asked to restart the NDrive
software. Select OK, and you will be taken to the initial screen seen after
powering on the device. Select Navigation again to restart NDrive.

5.8.6.3 Theme

Allows you to change between two different themes for the menu button colour
Classical and Rainbow. With Classical, the buttons will be shown red while
Rainbow will show each button in a different colour. Use "+" and "–" to switch
between Classical and Rainbow.
Select
current theme, the changes will only be applied after a restart of the software is
carried out. You will be asked if you wish to restart the software now. Select Yes
to carry out the restart, or No if you wish to restart the software later.
36
to confirm your settings. You will be taken to the main
to confirm your settings. You will be taken to the main
to confirm your settings. If you have made a change to the
Navigation