Date Time; Calibration; Language; Restore Set - Motorola XPLORE 500 User Manual

3.2.4

Date Time

This device can auto-set the current date and time by receiving 3 GPS signals. It
has a default timezone based on the country of purchase. To change the time
zone, use the "<" or ">" keys to modify the value of the required fields.
Press to confirm and exit.
3.2.5

Calibration

This function calibrates the unit to respond to your screen taps. You will need to
use this function only if the unit begins to respond inconsistently to your screen
taps.
After selecting, follow the on-screen instructions. Once the calibration has been
completed, press anywhere on the screen to return to the previous menu.
3.2.6

Language

Press Language to change the language. Tap on the screen to scroll through
the available language options. Select the language you want from the available
options so that a √ is shown, then press
3.2.7

Restore Set

Under extreme circumstances, it may be necessary to restore the system.
Restore the system if the following situation occurs:
• Slow screen refresh rate or sluggish operation, resulting in an inoperable unit.
• The system will not turn Off with the On/Off button.
• No response to any selection made on the screen.
3.2.8

System Info

The system info page contains information about the software version of your
operating system.
16
to confirm and exit.
Basic Device Operations and Settings