Sampler Commands; Display Sampler - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Sampler commands

display sampler

Use display sampler to display configuration information about a sampler.
Syntax
In standalone mode:
display sampler [ sampler-name ] [ slot slot-number ]
In IRF mode:
display sampler [ sampler-name ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
sampler-name: Specifies a sampler by its name, a case-insensitive string of 1 to 31 characters. Without
this argument, the command displays configuration information about all samplers.
slot slot-number: Specifies a card by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument specifies the ID of the IRF member device. The slot-number argument specifies the slot number
of the card. (In IRF mode.)
Examples
# Display the configuration information about sampler 256.
<Sysname> display sampler 256
Sampler name: 256
Mode: Fixed;
# Display the configuration information about sampler 256 for card 1. (In standalone mode.)
<Sysname> display sampler 256 slot 1
Sampler name: 256
Mode: Fixed;
# Display the configuration information about sampler 256 for card 1 on IRF member device 1. (In IRF
mode.)
<Sysname> display sampler 256 chassis 1 slot 1
Sampler name: 256
Mode: Fixed;
Packet-interval: 8
Packet-interval: 8
Packet-interval: 8
194