Mirroring-Group Remote-Probe Vlan - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

[Sysname-GigabitEthernet3/0/2] mirroring-group 2 reflector-port
This operation may delete all settings made on the interface. Continue? [Y/N]: y
Related commands
mirroring-group

mirroring-group remote-probe vlan

Use mirroring-group remote-probe vlan to specify a VLAN as the remote probe VLAN for a mirroring
group.
Use undo mirroring-group remote-probe vlan to remove a remote probe VLAN from a mirroring group.
Syntax
mirroring-group group-id remote-probe vlan vlan-id
undo mirroring-group group-id remote-probe vlan vlan-id
Default
No remote probe VLAN is configured for a mirroring group.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
group-id: Specifies the number of a mirroring group, in the range of 1 to 64. The mirroring group
specified by group-id must already exist.
vlan-id: Specifies a VLAN by its ID.
Usage guidelines
You can configure a remote probe VLAN only for a remote source group or remote destination group but
not for a local mirroring group.
When a VLAN is configured as a remote probe VLAN, use the remote probe VLAN for port mirroring
exclusively.
The remote mirroring groups on the source device and destination device must use the same remote
probe VLAN.
Only a static VLAN that already exists can be configured as a remote probe VLAN. A VLAN can be
configured as the remote probe VLAN for only one mirroring group.
To delete a VLAN that is configured as a remote probe VLAN, remove the remote probe VLAN
configuration first.
Examples
# Create remote source group 1 and configure VLAN 10 as its remote probe VLAN.
<Sysname> system-view
[Sysname] mirroring-group 1 remote-source
[Sysname] mirroring-group 1 remote-probe vlan 10
190