GE D90 Plus Instruction Manual page 121

CHAPTER 6: COMMUNICATIONS
IEC 61850 GOOSE analog inputs
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 86: Remote output UserSt bit pair configuration settings
The following settings are available for each of the 32 bit pairs.
Operand
Range: any FlexLogic™ operand
Default: Off
This setting specifies the FlexLogic™ operand assigned to UserSt point 1.
Events
Range: Enabled, Disabled
Default: Disabled
This setting enables and disables the logging of remote output UserSt bit pair events in
the sequence of events recorder.
The IEC 61850 GOOSE analog inputs feature allows the transmission of analog values
Plus
between any two UR -series devices.
Select the Settings > Communications > IEC 61850 > GSSE/GOOSE Configuration >
Inputs/Outputs > IEC 61850 GOOSE Analog Inputs menu item to open the IEC 61850
GOOSE analog inputs configuration window.
Figure 87: IEC 61850 GOOSE analog inputs configuration settings
IEC 61850 COMMUNICATIONS
113