Value Range
Default Value
MIN_DELAY_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
NOM_DELAY_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
RTP_PORT_MIN
Value Format
Description
Value Range
Document Version: 2017-07
3–50 (× 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than "NOM_DELAY"
–
This value must be greater than "MIN_DELAY"
–
"NOM_DELAY" must be greater than or equal to
"MIN_DELAY"
20
INTEGER
Specifies the minimum delay, in 10-millisecond units, of the jitter
buffer.
1 or 2 (× 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to "NOM_DELAY"
–
This value must be less than "MAX_DELAY"
–
"MAX_DELAY" must be greater than "NOM_DELAY"
2
INTEGER
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
1–7 (× 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than or equal to "MIN_DELAY"
–
This value must be less than "MAX_DELAY"
1
INTEGER
Specifies the lowest port number that the unit will use for RTP
packets.
1024–59598 (only even)
5.3.26 RTP/RTCP/RTCP-XR Settings
Administrator Guide
297