Panasonic KX-HDV130 Manual page 231

ANNEX_G_STUN_MIN_KEEP_ALIVE
Value Format
Description
Value Range
Default Value
UDP_CON_REQ_ADDR_NOTIFY_LIMIT
Value Format
Description
Value Range
Default Value
DEVICE_PROVISIONING_CODE
Value Format
Description
Value Range
Default Value
TR069_REGISTERING
Value Format
Description
Value Range
Default Value
TR069_REGISTERED
Value Format
Description
Value Range
Default Value
Document Version: 2017-07
INTEGER
Specifies the minimum period, in seconds, that STUN Binding
Requests can be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This limit applies only to Binding Requests
sent from the UDP Connection Request address and port, and only
those that do not contain the BINDING-CHANGE attribute.
Note
•
This setting is available only when "ANNEX_G_STUN_ENABLE"
is set to "Y".
1–3600
30
INTEGER
Specifies the minimum time, in seconds, between Active Notifications
resulting from changes to the "UDPConnectionRequestAddress" (if
Active Notification is enabled).
0–65535
0
STRING
Specifies the device provisioning code for use with TR-106
parameters.
Max. 64 characters
Empty string
STRING
Specifies the line status that TR-069 outputs while the line is being
registered.
Max.16 characters
Error
STRING
Specifies the line status that TR-069 outputs when the line has been
registered.
Max.16 characters
Registering
5.3.9 TR-069 Settings
Administrator Guide 231