Virtual Outputs; Autoreclose; Rxgoose Status; Rxgoose Statistics - GE c60 Instruction Manual

CHAPTER 6: ACTUAL VALUES
The present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contact
output. For example, 'Cont Op 1' refers to the contact output in terms of the default name-array index. The second line of
the display indicates the logic state of the contact output.
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn, and VOn.
For form-C contact outputs, the state is displayed as Off or On.

6.2.7 Virtual outputs

ACTUAL VALUES  STATUS  VIRTUAL OUTPUTS
 VIRTUAL OUTPUTS

The present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtual
output. For example, 'Virt Op 1' refers to the virtual output in terms of the default name-array index. The second line of the
display indicates the logic state of the virtual output, as calculated by the FlexLogic equation for that output.

6.2.8 Autoreclose

ACTUAL VALUES  STATUS  AUTORECLOSE
 AUTORECLOSE

The automatic reclosure shot count is shown here.

6.2.9 RxGOOSE status

ACTUAL VALUES  STATUS  RxGOOSE STATUS
 RxGOOSE STATUS

The C60 is provided with optional IEC 61850 capability. This feature is specified as a software option at
the time of ordering. See the Order Codes section of chapter 2 for details.
The actual value does not consider RxGOOSE that are not configured or are not used by any RxGOOSE
All RxGOOSE Online
Input.

6.2.10 RxGOOSE statistics

ACTUAL VALUES  STATUS  RxGOOSE STATISTICS  RxGOOSE 1(16)
 RxGOOSE 1

C60 BREAKER PROTECTION SYSTEM – INSTRUCTION MANUAL
Virt Op 1

Off

Virt Op 96

Off
AUTORECLOSE

SHOT COUNT: 0
All RxGOOSE Online:

Yes
RxGOOSE 1:

Off

RxGOOSE 16:

Off
RxGOOSE 1

stNum: 0
Range: On, Off
Range: On, Off
Range: 0, 1, 2, 3, 4
Range: Yes, No
Range: On, Off
Range: On, Off
STATUS
6
6-5