7-28
7.6.10 Reassemble the Vacuum Port Seal (27), Ventilation Label (28) and Bottom
Label (3)
1. Adhere and gently press the Vacuum Port Seal (27) on the chassis' recess as shown in
Figure 7-40.
2. With the Vacuum Port Seal assembled, adhere the Ventilation Label (28) on the chassis'
recess as shown in
3. Adhere the Bottom Label (3) on the recess at the bottom of the Front Housing as shown in
Figure 7-42.
Figure 7-40. Assemble the Vacuum Port Seal
Figure 7-42.
Figure 7-41. Assemble the Ventilation Label
Figure 7-42. Assemble the Bottom Label
Disassembly/Reassembly Procedures: Radio Reassembly