Motorola APX 1000 Basic Service Manual page 214

7-6
7.4.3 Remove Multi Function Knob (6)
1. Hold the radio with the top facing upward and the front of the radio facing you.
2. With the Chassis Opener, grasp the Multi Function Knob and pull it upward, until it is free from
its shaft.
7.4.4 Remove Accessory-Connector Cover (1)
!
a u t i o n
1. Unscrew the thumb screw. If the screw is too tight, use an Allen wrench.
NOTE: Do not remove the screw. It should remain captive in the cover.
Figure 7-5. Removing the Multi Function Knob
When the accessory connector is not in use, keep it covered
with the Accessory-Connector Cover.
Disassembly/Reassembly Procedures: Radio Disassembly