Unlock, Lock, Disable And Enable Doors - GE Advisor MASTER ATS111 series Manager Manual

Table of Contents

ATS Control Panel

Manager's manual

23. Unlock, lock, disable and enable doors

Use this function to unlock, lock disable and enable a valid door via the LCD arming station.

The function can only be used with door numbers 17 to 64. I.e. doors controlled by four-door DGPs.

The door remains in the state selected until an opposite event occurs in the system that will change the state of

that door, for example, Door 21 automatically unlocks at 08:00H and relocks at 17:00H (using an "Override

Timezone").

If the user wants to arm the premises and leave at 16:00, the door can be locked using the "lock" option, but

will still automatically unlock at 08:00 again the following morning.

To unlock, lock, disable or enable a door via the arming station

1. Access menu option 23.

The display shows:

2. Enter the door function option you want to do and press [ENTER], or

press [ENTER] to return to the menu.

The display shows the option selected:

Example:

3. Enter the door number to unlock and press [ENTER] to return to the menu, or

press only [ENTER] to return to the menu.

Only doors programmed to be opened by your code can be operated using this option. For example, the door group

assigned to the user may not allow access to all doors.

Table of Contents

Advisor masterats110 series