Panel Status - GE Advisor MASTER ATS111 series Manager Manual

1. Panel status

Use this function to list all zones that are in alarm, tamper alarm, inhibited or active and any system alarms.
There are menu options available that display each of these conditions separately. However, this option can be
used to check on all zones that need attention. The letter preceding the zone number shows the status:
Code Zone status
A Alarm
T Tamper alarm
i Inhibited
a Active
To list all the state of all zones: Access menu option 1.
What happens next depends on the status of the zones:
No zones in alarm, tamper, inhibited or active
No Alarms, Tampers, Inhibits, Active
Press ENTER
From the display you can now:
Option
Display the complete zone name
Update the list
Exit
See also: Menu option 2, Zones active on page 28; Menu option 3, Zones in alarm on page 29; Menu option 4, Zones inhibited
on page 30.
Meaning
An alarm has occurred at this zone and must be acknowledged and reset. See the section
Alarm on page 20.
An alarm has occurred at this zone due to tamper or accidental damage. The alarm must be
acknowledged and reset. See the section Alarm on page 20.
The zone has been excluded from functioning as part of the security system. It is probably
broken or faulty.
The zone is activated and needs to be checked and fixed if necessary to ensure security is
maintained. For example, close the door.
Action
Enter the zone number and
press [ENTER]
Press [NEXT]
Press [ENTER]
Zones in alarm, tamper alarm, inhibited or active
Zones are listed either one at a time, or as a list of numbers:
Summary On A2. Front Door Contact
NEXT or ENTER
or
Summary On A1, A3, T4, i5, i9.
Input No:
Result
Display the complete zone name
(Excludes the status No alarms, tampers, inhibit,
active).
Update the list of zone status.
Exit the menu option and return to the display
"Code:"
27