Other Messages - Canon iPF6300 User Manual

Other Messages

GARO Wxxxx (x represents a number) ..................................................................................................... 931
ERROR Exxx-xxxx (x represents a letter or number) ................................................................................ 931
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ............................................................. 931
Prepare for parts replacement. .................................................................................................................. 932
Parts replacement time has passed. ......................................................................................................... 932
Unknown file. ............................................................................................................................................. 932
Calibration There is a problem with the multi-sensor. .............................................................................. 932
Multi-sensor error ...................................................................................................................................... 932
GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
Cause
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job.
The paper was not advanced because the trailing edge is ta-
ped to the roll.
Fastening tape or the Belt Stopper has not been removed
inside the Top Cover.
An error requiring service may have occurred.
iPF6300
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Write down the error code and message, turn off the printer, and
contact your Canon dealer for assistance.
Cause
Error Message
Corrective Action
Corrective Action
Corrective Action
Turn off the printer and remove the roll from the
printer before restoring power.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds
before restoring the power.
If the message is displayed again, write down the er-
ror code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
GARO Wxxxx (x represents a number)
> Other Messages >
12
931