Canon iPF6300 User Manual page 799

Adjust Feed Adj.
Print- Priori- Quali-
er ty ty
Adjust
Lengt
h
Adj Far Ed Feed
Cali- Auto Adjust
bra-
tion
Calibration Log
Use Adj. Value
Return Defaults
Main- Head Cleaning
te-
nance
iPF6300
Setting Item
Auto(GenuinePpr)
Auto(OtherPaper)
Manual
Ad- A:High
just-
B:Standard/
ment-
Draft
Print
Chang A:High
e Set-
B:Standard/
tings
Draft
Printer Parts
Description, Instructions
The printer prints and reads a test pattern for auto-
matic adjustment of the feed amount. (See "Auto-
matic Banding Adjustment (Adj. Quality).")
→P.719
Specify this mode with paper not in the Paper Ref-
erence Guide.
The printer prints and reads a test pattern for auto-
matic adjustment of the feed amount. Note that this
function takes more time and consumes more ink
than Auto(GenuinePpr). (See "Automatic Band-
ing Adjustment (Adj. Quality).")
Use this mode with highly transparent media or
other paper for which Auto(GenuinePpr) or Au-
to(OtherPaper) cannot be used.
Print a test pattern for adjustment of the feed
amount based on the type of paper. (See "Manual
Banding Adjustment (Adj. Quality).")
Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment. (See
"Adjusting Line Length (Adjust Length).")
→P.723
Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from Adjust-
mentPrint or the discrepancy that you measured
(as a percentage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount
by choosing a lower adjustment value.
Choose Yes to adjust the feed amount for the trail-
ing edge.
Choose Yes for automatic adjustment of the adjust-
ment value after a test pattern for color calibration
is printed. The new color calibration adjustment
value is applied in all print jobs.
Check the date when color calibration was execu-
ted, as well as the type of paper used, as shown on
the Display Screen.
Choose Disabled > OK if you prefer not to apply
the color calibration adjustment value in print jobs.
The printer driver settings will be used instead.
Choose Enabled > OK to apply the color calibra-
tion adjustment value in print jobs. However, print-
er driver settings are given priority.
Clear the color calibration adjustment value and the
execution log.
Clean the Printhead. (See "Cleaning the Print-
head.")
→P.848
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
> Control Panel >
→P.719
→P.721
8
783
Menu Settings