Canon iPF6300 User Manual page 731

2.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
Note
• If the Tab Selection screen is not displayed, press the Menu button.
3.
Press the OK button.
The Set./Adj. Menu is displayed.
4.
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
5.
Press ▲ or ▼ to select Head Posi. Adj., and then press the OK button.
6.
Press ▲ or ▼ to select Manual, and then press the OK button.
A test pattern is printed for adjustment.
7.
Press ▲ or ▼ to select D, and then press the OK button.
8.
Press ▲ or ▼ to select D-1, and then press the OK button.
9.
Examine adjustment test pattern D-1 and determine the number with straight lines.
Note
• If two patterns seem equally good and you cannot decide which one is better, choose an inter-
mediate value.
For example, choose 11 if you cannot decide whether pattern 10 or 12 is better.
10.
Press ▲ or ▼ to select the pattern number you have decided, and then press the OK button.
11.
Repeat steps 8–10 to specify the adjustment value for D-1 to D-5, D-7 to D-12, D-25 to D-29, and D-31 to D-36.
12.
Press the Back button.
iPF6300
Adjustments for Better Print Quality
Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.)
> Adjusting the Printhead >
).
7
715