Description - Siemens RUGGEDCOM RX1400 Installation Manual

Chapter 1
Introduction
Power Supply
• 12 to 24 VDC
• ±12 to 24 VDC
• ±48 VDC
• HI VAC/VDC
Section 1.2

Description

The RUGGEDCOM RX1400 features various ports, controls and indicator LEDs on the front panel for connecting,
configuring and troubleshooting the device.
Figure 1: RUGGEDCOM RX1400
1. Serial Ports 2. Access Plate 3. Port Status LEDs 4. ANT1 Port 5. Fast Ethernet Ports 6. ANT2 Port 7. SFP Transceiver Ports
8. Failsafe Alarm Relay 9. ANT3 Port 10. ANT4 Port 11. Power Supply Terminal Block 12. RS232 Serial Console Port (DB9) 13. ANT5
Port 14. POWER LED 15. ALARM LED 16. CELL LED
POWER LED
ALARM LED
2
3
1
2
12 13
Illuminates when power is being supplied to the device.
Illuminates when an alarm condition exists.
Optical SFP Pluggable Transceivers
• 2 x 1000 Mbps ports
Serial Interfaces with Isolation
• 2 x RS232/422/485 ports
Other Interfaces
• Isolated built-in power input
• RS-232 console port for local management/
diagnostics on the device
• SMA connectors for cellular, GPS and RF interfaces
• R-SMA connectors for WLAN RF interface
14
4
15
5
16
6
7
8
9
10
11
RUGGEDCOM RX1400
Installation Guide
Description