Hitachi HT-4139-28 Troubleshooting Manual page 30

Table 2.2 Error Code (Host)
Code Detail Cause
80G0A101 - Sheet information table check error has
occurred.
00040310 Sheet thickness check method
specification error
00040311 Mixed sheet thickness specification error
00040312 Minimum sheet thickness check omission
specification error
00040313 Sheet thickness specification error
(Standard value)
00040314 Sheet thickness specification error (Step
Height value)
00040315 Sheet thickness specification error
(Ultrasonic multi-feed detection length)
00040316 Sheet skew check specification error
00040317 Sheet skew angle specification error (Left
limit angle)
00040318 Sheet skew angle specification error
(Right limit angle)
00040319 Sheet length check-cancellation
specification error
0004031A Sheet width check-cancellation
specification error
0004031B Sheet thickness check-cancellation
specification error
0004031 Four-point rectangular error bypass
C specification error
0004031E Four-point detection error bypass
specification error
0004031F Recognition check flag specification error
(8/29)
Troubleshooting
Recovery
-
Check Sheet setting again.
Refer to Appendix of this
manual: A-4 Notes for sheet
check.
If not recovered, get dump
information (refer to 1.4) and
contact Hitachi.
2-19