Displaying Information About Ipv6 Mce; Ipv6 Mce Configuration Example - HP 10500 Series Configuration Manual

Configuring IBGP between an IPv6 MCE and a PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 BGP-VPN
instance view.
4. Configure the PE as an
IBGP peer.
5. Create and enter BGP
IPv6 address family view.
6. Enable BGP to exchange
IPv6 unicast routing
information with the IBGP
peer.
7. Redistribute VPN routes.
8. (Optional.) Configure a
filtering policy to filter
advertised routes.
9. (Optional.) Configure a
filtering policy to filter
received routes.

Displaying information about IPv6 MCE

Execute display commands in any view.
Task
Display information about a specific or all VPN
instances.
Display BGP peer group information for a VPN
instance.
Display BGP peer information for a VPN
instance.
For commands that display information about a routing table, see Layer 3—IP Routing Command
Reference.

IPv6 MCE configuration example

Network requirements
As shown in
VPN 2 through VLAN-interface 20. RIPng is used in VPN 2.
Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
peer { group-name | ipv6-address }
as-number as-number
ipv6-family [ unicast ]
peer { group-name | ipv6-address } enable
import-route protocol [ process-id [ med
med-value | route-policy
route-policy-name ] * ]
filter-policy { acl6-number | prefix-list
ipv6-prefix-name } export [ protocol
process-id ]
filter-policy { acl6-number | prefix-list
ipv6-prefix-name } import
Figure 6, the IPv6 MCE device is connected to VPN 1 through VLAN-interface 10 and to
Command
display ip vpn-instance [ instance-name
vpn-instance-name ]
display bgp group ipv6 vpn-instance vpn-instance-name
[ group-name ]
display bgp peer ipv6 vpn-instance vpn-instance-name
[ group-name log-info | ipv6-address { log-info | verbose }
| verbose ]
38
Remarks
N/A
N/A
N/A
N/A
N/A
By default, BGP cannot
exchange IPv6 unicast routing
information with a peer.
By default, BGP does not
redistribute routes from any
other routing protocol.
By default, BGP does not filter
advertised routes.
By default, BGP does not filter
received routes.