Configuration Prerequisites; Configuring Routing Between An Mce And A Vpn Site - HP 10500 Series Configuration Manual

MCE-PE routing configuration
•

Configuration prerequisites

Before you configure routing on an MCE, complete the following tasks:
Configure VPN instances, and bind the VPN instances with the interfaces connected to the VPN
•
sites and the PE.
• Configure the link layer and network layer protocols on related interfaces to ensure IP connectivity.

Configuring routing between an MCE and a VPN site

Configuring static routing between an MCE and a VPN site
An MCE can reach a VPN site through a static route. Static routing on a traditional CE is globally
effective and thus does not support address overlapping among VPNs. An MCE supports binding a static
route with a VPN instance, so that the static routes of different VPN instances can be isolated from each
other.
To configure a static route to a VPN site:
Step
1. Enter system view.
2. Configure a static route
for a VPN instance.
3. (Optional.) Configure
the default preference
for static routes.
Configuring RIP between an MCE and a VPN site
A RIP process belongs to the public network or a single VPN instance. If you create a RIP process without
binding it to a VPN instance, the process belongs to the public network. Binding RIP processes to VPN
instances can isolate routes of different VPNs.
For more information about RIP, see Layer 3—IP Routing Configuration Guide.
To configure RIP between an MCE and a VPN site:
Step
Enter system view.
1.
Command
system-view
ip route-static vpn-instance s-vpn-instance-name
dest-address { mask | mask-length } { next-hop-address
[ public ] [ track track-entry-number ] | interface-type
interface-number [ next-hop-address ] | vpn-instance
d-vpn-instance-name next-hop-address [ track
track-entry-number ] } [ permanent ] [ preference
preference-value ] [ tag tag-value ] [ description
description-text ]
ip route-static default-preference
default-preference-value
Command
system-view
7
Remarks
N/A
Perform this
configuration on the
MCE. On the VPN
site, configure a
normal static route.
The default setting is
60.
Remarks
N/A