Configuring Routing Between An Mce And A Pe - HP 10500 Series Configuration Manual

Step
10. (Optional.) Configure a
filtering policy to filter
received routes.
Configure the VPN site:
2.
Step
1. Enter system view.
2. Enable BGP and enter BGP
view.
3. Configure the MCE as an
IBGP peer.
4. Create and enter BGP-VPN
IPv4 address family view.
5. Enable BGP to exchange IPv4
unicast routing information
with the specified peer or
peer group.
6. Redistribute the IGP routes of
the VPN.

Configuring routing between an MCE and a PE

MCE-PE routing configuration includes these tasks:
Bind the MCE-PE interfaces to VPN instances
•
Perform route configurations
•
• Redistribute VPN routes into the routing protocol running between the MCE and the PE.
Configuring static routing between an MCE and a PE
Step
1. Enter system view.
2. Configure a static route
for a VPN instance.
3. (Optional.) Configure
the default preference for
static routes.
Command
filter-policy { acl-number |
prefix-list prefix-list-name } import
Command
system-view
bgp as-number
peer { group-name | ip-address }
as-number as-number
ipv4-family [ unicast ]
peer { group-name | ip-address }
enable
import-route protocol [ { process-id
| all-processes } [ med med-value |
route-policy route-policy-name ] * ]
Command
system-view
ip route-static vpn-instance s-vpn-instance-name
dest-address { mask | mask-length } { next-hop-address
[ public ] [ track track-entry-number ] | interface-type
interface-number [ next-hop-address ] | vpn-instance
d-vpn-instance-name next-hop-address [ track
track-entry-number ] } [ permanent ] [ preference
preference-value ] [ tag tag-value ] [ description
description-text ]
ip route-static default-preference
default-preference-value
13
Remarks
By default, BGP does not filter
received routes.
Remarks
N/A
By default, BGP is disabled.
By default, no BGP peer or peer
group is configured.
N/A
By default, BGP does not exchange
IPv4 unicast routing information
with any peer or peer group.
By default, BGP does not
redistribute any IGP routes.
A VPN site must advertise the VPN
network addresses it can reach to
the connected MCE.
Remarks
N/A
By default, no static
route is configured.
The default setting
is 60.