Axis Expansion Plug-In Unit - Siemens SINUMERIK 810D Configuration Manual

5 Axis Expansion

5.1 Axis expansion plug-in unit

Note
When PS modules are more than 50mm in width and have an integrated
device bus, the free end of the device bus must be located in the 34-way
device bus connector on the module.
Fig. 5-2
Ribbon
The axis expansion plug-in unit has two connectors, X301 and X302. When
cable connection inserting in a single-axis power section, use connector X301. If you are using a
2-axis power section, connector X301 is assigned to the first axis and connector
X302 to the second axis.
5-84
Axis expansion
plug-in unit
Installing the axis expansion plug-in unit in the power section
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
SIMODRIVE 611
Power section
E Siemens AG, 2002. All rights reserved
12.95