Siemens SINUMERIK 810D Configuration Manual page 62

4 Description of the SINUMERIK 810D
4.2 Interfaces of the SINUMERIK 810D
X130
SIMODRIVE 611D drive bus interface and I/O expansion
Connector designation:
Connector type:
Maximum cable length:
Special features:
X131
Reserved
X151
"Device bus interface (power supply)
Connector designation:
Connector type:
X304, X305, X306
Connection for axis expansion plug- -in unit
Connector designation:
Connector type:
X341, X342,
Test sockets for the output of three analog signals. The software assigns
the measured values to be output.
X351, X352
Connector designation:
Connector type:
Table 4-7
X411- -X416
6x measuring system connections for indirect and direct position sensing
Connector designation:
Connector type:
The signals with a gray background are not required for a direct measuring
system.
4-60
X130
36-pin micro ribbon
10 m
Non-floating, no safe isolation
X151
34-pin ribbon cable, plug connector
X304, X305, X306
20-pin ribbon cable, plug connector
X341, X342, X351, X352
Test socket 2mm
Assignment of test sockets X341 to X352
Test socket Position on the
CCU
X351
ª ¬
¬ ¬
X352
¬ ª
¬ ¬
¬ ¬
X341
ª ¬
¬ ¬
X342
¬ ª
X411-X416
25-way, sub-D plug connector
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
Meaning range
DAC 1 0 - - 5V
DAC 2 0 - - 5V
DAC 3 0 - - 5V
Ground for all DACs
E Siemens AG, 2002. All rights reserved
12.95