Set Country / Language (Function Code: 52) - Brother DCP-L5500D Service Manual

Hide thumbs Also See for DCP-L5500D:

Table of Contents

1.3.15 Set country / language (function code: 52)

This function is user accessible, and is used to customize the EEPROM according to the

language, function settings, and firmware switch settings.

• This is only valid for models with spec code (detail) described in

(1) Press the [5], and then the [2] key in the initial state of user maintenance mode.

"Set Country" is displayed on the LCD.

(2) Select the country to be shipped, and then press the [SET] or [OK] key.

(3) Press the [Yes] key. The new setting is saved. Once the saving is completed, the

machine returns to the ready state.

"Setting by spec code

Confidential