Table of Contents
Advertisement
Assembling Note:
• Connect the ADF sensor harness and second side CIS flat cable* to the flat cable
holder as described in the figure below.
• In order to attach the second side CIS flat cable to the flat cable holder, attach it
properly in the direction of the arrows.
• For the sticking position of the double-sided tape, refer to the folding diagram of the flat
cable,
Fig.
3-46,
Fig. 3-47
Flat cable holder
and
Fig.
3-48.
Second side CIS flat cable*
Flat cable holder
Fig. 3-34
3-44
Double-sided tape
Second side CIS flat cable*
ADF sensor harness
* Models with duplex scanning only
Confidential
Advertisement
Table of Contents
Troubleshooting
