Contents - ABB ACS800 Hardware Manual

20

Contents

The chapters of this manual are briefly described below.
Safety instructions
operation and maintenance of the drive.
About this manual
commissioning the drive and refers to chapters/sections in this manual and other
manuals for particular tasks.
The ACS800-01/U1
Mechanical installation
Planning the electrical installation
protections and cable routing.
Electrical installation
Installation of AGPS board (Prevention of Unexpected Start, +Q950)
electrical installation instructions of the optional Prevention of Unexpected Start
function (+Q950) of the drive and specifications of the board.
Motor control and I/O board (RMIO)
I/O board.
Installation checklist
installation of the drive.
Maintenance
Technical data
sizes and technical requirements, provisions for fulfilling the requirements for CE
and other markings and warranty policy.
Dimensional drawings
Resistor braking
resistors. The chapter also contains the technical data.
External +24 V power supply for the RMIO board via terminal X34
connect an external +24 V power supply for the RMIO board using terminal X34.
About this manual
give safety instructions for the installation, commissioning,
lists the steps in checking the delivery and installing and
describes the drive.
instructs how to place and mount the drive.
shows how to wire the drive.
contains a list for checking the mechanical and electrical
contains preventive maintenance instructions.
contains the technical specifications of the drive, e.g. the ratings,
contains the dimensional drawings of the drive.
describes how to select, protect and wire brake choppers and
instructs on the motor and cable selection,
shows the external control connections to the
contains
describes how to