System Data - Siemens SINAMICS S120 Equipment Manual

1.7

System data

Technical data
Unless explicitly specified otherwise, the following technical specifications are valid for all
components of the SINAMICS S120 booksize drive system.
Electrical specifications
Line connection voltage
Line frequency
Electronics power supply
Conducted radio interference
Standard
•
With line filter
•
Overvoltage category
*If a motor holding brake is used, restricted tolerances may have to be taken into account.
Mechanical data
Vibratory load
Transportation
•
Warning
•
Shock stressing
Transportation
•
Warning
•
Ambient conditions
Degree of protection
The Safety-Integrated safety function:
The components must be protected against conducted contamination (e.g. by installing them in a cabinet with degree of
protection IP54).
Provided that conducted interference can be prevented at the installation site, the degree of protection for the cabinet can
be decreased accordingly.
Class of protection
Permissible ambient and coolant temperature (air) during
operation for line-side components, Line Modules and Motor
Modules
Permissible ambient and coolant temperature (air) during
operation for Control Units, additional system components,
DC link components and Sensor Modules
Equipment Manual Control Units and Additional System Components
Equipment Manual, (GH1), 12/2004 Edition, 6SL3097-2AH00-0BP1
3 AC 380 V to 480 V ±10 %
(-15 % < 1 min)
47 – 63 Hz
24 V DC, -15/+20 %*
No conducted radio interference
Class A1 to EN 55011
Class I to EN 60 664-1
EN 60 721-3-2, class 2M3
EN 60 721-3-3, class 3M4
EN 60 721-3-2, class 2M3
EN 60 721-3-3, class 3M4
IP20 to EN 60 529
Class I (with protective conductor system) and
Class III (PELV) to EN 61 800-5-1
0° C to 40° C without derating,
>40° C to +55° C (see derating characteristics)
0° C to +55° C
System Overview
1.7 System data
1-9